This page is currently under construction and
certainly incomplete!
If you miss a project please mail to me.
Many links are still void (marked red).
HERA-B
SLT / TLT / 4LT / DAQ Projects
Services
Coordination
- First
Level Trigger (Dominik Ressing)
- Second
Level Trigger (Mike Medinnis)
- Third
and Fourth Level Trigger Farm (Andreas Gellrich)
- Run
'97, Run & Slow Control (John Zweizig)
- DAQ
Hardware and Data Path (Dominik
Ressing)
Maintenance
(responsible: not yet defined)
- SHARC
Bug tracing (Joerg Luedemann)
- Source
Code Management (Samim Erhan)
- DAQ
Linux Cluster (Klaus Ehret)
- DAQ
VME Lynx Cluster (Klaus Ehret)
General Hardware
(responsible: Dominik Ressing)
- VME
crates (Rainer Wurth)
- SHARC
Cluster (Rainer Wurth)
- Fast
Control System (Thomas Fuljahn)
Data path
(responsible: Dominik Ressing)
view Hardware Architecture or Software
Architecture
- VME
based SHARC Readout (Joerg Luedemann)
- Second
Level Buffer Manager (Bertram Rensch, John Zweizig)
- Event
Controller (Bertram Rensch, John Zweizig)
- Routing
Switch (Mike Medinnis)
- Event
Buffer Manager (John Zweizig)
- SHARC
to PCI interface driver (Iosif Legrand)
Sensors, Field Busses, Power Supplies,...
(responsible: not yet defined)
- CAN
bus driver (Georg Leffers)
- Remote
VME crate control (Victor Zerkin)
- High
Voltage System and Controller (Chrisobal Padilla)
Run & Slow Control
(responsible: John Zweizig)
-
State Machine Control Package SMC (Vladimir Rybnikov)
- Process
Control and Configuration (John Zweizig)
- Fast
Control System Server (Thomas Fuljahn)
- Component
Monitor and Control Template (John Zweizig)
- Diagnostic
tool Template (John Zweizig)
Utilities
(responsible: Dominik Ressing)
- template
for project description (Dominik
Ressing)
- Message
System RPM (John Zweizig)
- SHARC
Kernel Library (Joerg Luedemann)
- SHARC
Board Controller and tools (Joerg Luedemann)
- Table
Data Base (Thomas Kihm)
- Table
Data Base Display and Editor (Georg Leffers)
- Histogramming
(Thomas Kihm)
SLT specific
(responsible: Mike Medinnis)
- SHARC
to PCI Interface (Karl-Heinz Sulanke)
- SLT
and TLT nodes and Installation (Mogens Dam)
- PC
controller on CAN (Mogens Dam)
- Level
2 Simulation and Development Frame (Mike Medinnis)
- Slicer
(Mike Medinnis)
- FLT
Refit (Samin Erhan)
- Magnet
Tracking (Stefania Xella)
- Silicon
Tracking (Soeren Schmidt)
- Vertexing
(NN)
- SLT
in 1997 (Peter Kreuzer)
TLT & L4 specific
(responsible: Andreas Gellrich)
- Level
4 nodes and Installation (Andreas Gellrich)
-
Data
Archival (Andreas Gellrich)
Edited by Dominik Ressing
Last change 9-Jan-2009, Ursula.Djuanda(at)desy.de